Collecting/Registering Host Information On Application Server; Collecting Host Information By Using File Output - NEC Storage M100 Series User Manual

User Guide
B.2 Collecting/Registering Host Information on Application Server
The procedure described below is not supported by the disk arrays connected via SAS.
B.2.1 Collecting Host Information by Using File Output
To collect host information by using file output, follow the procedure below.
1. Run host information collection command (iSMcc_hostinfo)
Run the host information collection command (iSMcc_hostinfo) from the command prompt. For
the -export option, specify a file (host information file) to which host information will be reported.
Run the host information collection command (iSMcc_hostinfo) as a user privileged as
Administrator.
D:\> iSMcc_hostinfo -export \ServerName
iSMcc_hostinfo: Info:
iSMcc_hostinfo: Info:
successfully. (code=
aaaa-bbbb-bbbb-bbbb)
iSMcc_hostinfo: Info:
successfully.
2. Confirm the result of running the command
After running the host information collection command (iSMcc_hostinfo), confirm that the
message No. iSM11770 is reported and the host information is successfully collected. "aaaa" in the
message example above is replaced with a process number and "bbbb" with an internal code for
maintenance in the actual message.
3. Transferring the host information file
Transfer the host information file reported by using the host information collection command
(iSMcc_hostinfo) to a client by using file transfer, USB memory, or other methods.
To register host information files transferred to clients, see
Information by Using File
Release 6.0
Appendix B How to Set/Check Application Server (Windows) (FC/SAS)
iSM11700: Please wait a minute.
iSM11770: Host Information was exported
iSM11100: Command has completed
Output".
311
Section B.2.2: "Registering Host