Figure H-25: Add Storage Wizard Screen (3) - NEC Storage M100 Series User Manual

Disk array unit

Hide thumbs Also See for Storage M100 Series:

Table of Contents

7. Adjust the file system values and area to be used for data store. The default settings is to set the

storage device for all empty areas. After completing the settings, click Next.

8. When the Completed Settings screen appears, check the data store configuration. If there are no

problems with the settings, click the Finish button.

9. Click the Change button.

Figure H-25: Add Storage Wizard Screen (3)

Until now, a data store has been created in an iSCSI storage device that can be

accessed by Software Initiator.

Appendix H How to Set/Check Application Server (VMware) (iSCSI)

Storage m300 series