Figure 7-14: Pool Bind - Completion - NEC Storage M100 Series User Manual

User Guide
7.3.2.3 Pool Bind - Completion
When the pool binding is successfully completed, the result of pool binding appears.
Parameter
Bind another pool
Bind hot spare
Bind logical disk
Perform the following steps:
1. Click Bind hot spare to bind hot spare.
2. If you do not want to bind hot spare, click Bind logical disk to move on to logical disk binding.
Release 6.0

Figure 7-14: Pool Bind - Completion

Description
Click this hyperlink to reopen the Pool Bind page to bind
another pool.
Click this hyperlink to open the Hot Spare Bind page.
Click this hyperlink to open the Logical Disk Bind page.
226
Chapter 7 Initializing a Disk Array (SAS)