NEC Storage M100 Series User Manual page 430

User Guide
When the kernel version number is 2.6.18-238.el5 (FC connection)
# sh install.sh -i --silent
====== Precheck for SPS Installation / Uninstallation =======
Distribution : RedHat
Architecture : i686
Kernel Version: Linux2.6
Kernel Details: 2.6.18-238.el5
--------- The following packages will be installed. ---------
driver :
./Express5800_100/RPMS/RHEL5/5.6/IA32/sps-driver-E-5.0.0-2.6.18.238.e
l5.i686.rpm
utils :
./Express5800_100/RPMS/RHEL5/5.6/IA32/sps-utils-5.0.0-0.i686.rpm
=============================================================
Preparing... ########################################### [100%]
1:sps-driver-E ########################################### [100%]
Preparing... ########################################### [100%]
1:sps-utils ########################################### [100%]
patching file rc.sysinit
Starting up sps devices:
Couldn't open /etc/sps.conf. No such file or directory.
I try auto setting...
Wait.
parsing... device:/dev/dda (OK)
parsing... disk-info:NEC ,DISK ARRAY ,0000000935000734,00001 (OK)
parsing... LoadBalance:D2 (OK)
parsing... path-info:0 Host:scsi:8 Channel:0 Id:0 Lun:0 Priority:1
Watch:Enable Status:ACT (OK)
parsing... path-info:7 Host:scsi:7 Channel:0 Id:0 Lun:0 Priority:2
Watch:Enable Status:HOT (OK)
Wait until all /dev/ddX is made..........END
dd_daemon (pid 3963) is running...
sps Install Completed......
#
Broadcast message from root (Thu Feb 25 14:15:57 2010):
The system is going DOWN for reboot in 1 minute!
3. When the installation is completed successfully, the message, sps Install Completed (shaded
area) is reported. If this message is not shown, it indicates the installation has failed, in which case,
see NEC Storage Software NEC Storage PathManager for Linux User's Manual for information and
actions to be taken.
4. When the installation is finished successfully, the system restarts after 1 minute. Check if the OS is
operating successfully.
The installation of PathManager is now complete.
Release 6.0
Appendix I Installing NEC Storage PathManager
430
This is always shown
when SPS is installed for
the first time. It does not
affect operation.