NEC Storage M100 Series User Manual page 279

User Guide
Problem
When access to the disk array is
attempted from NEC Storage
Manager Client (Web GUI), the
Windows Security Alert dialog box
tells a Web browser function is
blocked
When access to the disk array is
attempted from NEC Storage
Manager Client (Web GUI), the Java
icon continues to be shown on the
Web browser window and the login
window does not appear.
Release 6.0
Cause and Solution
The function is blocked by a firewall. Click Unblock on the
dialog box or configure the firewall settings in advance so
that your Web browser is not blocked.
The connection may fail when your Web browser is
configured to go through a proxy server. In this case,
configure the proxy exception of the Web browser so that
disk array is connected without going through a proxy
server. Follow the steps below.
Perform Step 1 through 3 only when Internet Explorer is
used.
1. Click Control Panel, and Internet Options. On the
Connections tab click LAN Settings to open the LAN
Settings dialog box.
2. If the Use a proxy server check box is not selected, the
following procedure is not necessary. If this check box is
selected, click Advanced to open the Proxy Settings
dialog box.
3. Add both the host name and the IP address to the Do not
use proxy server for addresses beginning with box.
Steps from 4 should be performed if your browser is
Internet Explorer or Firefox.
4. Follow the steps below to check the JRE proxy settings
Select Control Panel, Java and Network Setting to see
whether the User browser settings check box has been
selected. If not, click Advanced to add both the host
name and the IP address of the connecting destination to
the Exceptions box.
5.Exit and restart Web browsers.
279
Chapter 10 Troubleshooting