Table of Contents
Advertisement
User Guide
D.1.4 Setting up iSCSI Initiator
Perform the following steps to install iSCSI Initiator in Windows Server 2008 R2 environments:
1. Select Start > Administrative Tools, and then start iSCSI Initiator.
2. Check iqn (iSCSi Qualified Name) displayed under Initiator Name on the Configuration tab in the
iSCSI Initiator Properties screen.
3. If mutual CHAP authentication will be used, click the CHAP button and enter the password.
Release 6.0
Appendix D How to Set/Check Application Server (Windows) (iSCSI HW Initiator)
Figure D-7: iSCSI Initiator Properties - Configuration Tab
362
Advertisement
Table of Contents
Troubleshooting
