Installing And Setting Up The Software - NEC Storage M110 Setup Manual

７

Installing and Setting Up the Software

Install the software required to prepare and set up the NEC Storage Manager client.
7-1
Preparation
Prepare the client machine on which NEC Storage Manager client will be used. See the following section:
4-1 Configuring NEC Storage Manager
4-2 Configuring Internet Explorer and Java for NEC Storage Manager
7-2
Specifying the IP address
Install the network setup tool and then specify the IP address for the disk array. See the following sections:
4-3-1 Installing Network Setting Tool
4-3-2 Configuring IP Addresses by Using Network Setting Tool
4-3-3 Setting the Disk Array Unit Time Zone
7-3
Installing NEC Storage Manager Agent Utility
Install NEC Storage Manager Agent Utility on the application server. See the following section:
4-4 Installing NEC Storage Manager Agent Utility on Application Server
7-4
Starting NEC Storage Manager client
Start the NEC Storage Manager client on the client machine. See the following section:
4-5 Starting NEC Storage Manager Client