Table of Contents
Advertisement
User Guide
D.1.2 Preparation
1. Provide IP addresses for an application server
Prepare IP addresses to be assigned to the application server as many as the connection ports. In
addition, prepare the subnet mask and gateway addresses by asking the network administrator.
2. Connect to the disk array unit
Use a 10-Gbps cable to connect the application server to the host port (HP connector) of the disk
array unit.
For a sample connection configuration, see
Configuration-Examples.
For the positions of the host ports, see "(5) Connect to the disk array unit" of
Preparation.
Release 6.0
Appendix D How to Set/Check Application Server (Windows) (iSCSI HW Initiator)
NF9320-SJxx (FC cable) can be used.
Appendix L: iSCSI Connection
356
Section C.1.1:
Advertisement
Table of Contents
Troubleshooting
