Collecting Host Information From Application Server; Figure 5-2: Configuration - Collect Host Information Using Host Information Collection Command - NEC Storage M100 Series User Manual

User Guide
2. Collecting host information by using files reported by the host information collection
command
When a disk array is installed in a system that has already begun operating or any of the application
servers to be connected by FC cables is on an OS other than Windows or Linux (RHEL5 or later or
SLES10 or later), use the host information collection command to report files. Registering the
reported files allows assigning the application server to created logical disks. For details about how
to register reported files, see
a Windows environment, or
Linux environment.
Figure 5-2: Configuration - Collect Host Information Using Host Information Collection

5.2.1 Collecting Host Information From Application Server

To make settings for collecting host information automatically or through a disk array, see
5.3.5: "Collecting Host
For details about how to collect host information, see one of the following depending on the platform of
the application server:
 For a Windows application server, see
Application
 For a Linux application server, see
Application
Release 6.0
Section B.2.2: "Registering Host Information by Using File Output"
Section E.2.2: "Registering Host Information by Using File Output"
Information".
Server".
Server".
Command
Section B.2: "Collecting/Registering Host Information on
Section E.2: "Collecting/Registering Host Information on
129
Chapter 5 Initializing a Disk Array (FC)
for
for a
Section