Cache Modules - NEC Storage M100 Series User Manual

User Guide

8.3.6 Cache Modules

For installing and removing the cache modules, follow the procedure given below:
1. Remove the controller (CONT) from its cabinet.
See Section 8.3.2:
2. Remove the controller cover.
See Figure 8-10: Removing the Controller
3. Remove two DIMMs.
Push the levers (circled in blue in the illustration below) on both sides of the DIMM sockets outward,
and then remove the DIMMs from each socket by pulling them upward.
Release 6.0
 This procedure can be used only for the M series.
 DIMMs and Flash Memory ASSYs composing the cache module are
precision machines. Protect them from any shock or vibration.
 Cache modules are electrical parts. When handling them, take an
anti-static measure such as using a wrist strap.
"Controllers".
259
Cover.
Chapter 8 Installing Optional Parts