Figure 1-12: Led Display - Disk Array Unit Controller (Cont); Table 1-6: Management Port/Maintenance Port Status; Table 1-7: Status Display Led - NEC Storage M100 Series User Manual

User Guide
(10) HOST PORT ACTIVE LED
(9) HOST PORT LINK LED
Management port/Maintenance port
(2) Management port LINK/ACT LED (green)
(4) Maintenance port LINK/ACT LED (green)
(1) Management port SPEED LED
(green/orange)
(3) Maintenance port SPEED LED
(green/orange)
(5) Ready
LED
Green
Lit 1
second
Not lit 1
second
Flashing
fast
Release 6.0
(10) HOST PORT ACTIVE LED
(9) HOST PORT LINK LED
(E) FC 2-Port +1G iSCSI controller

Figure 1-12: LED Display - Disk Array Unit Controller (CONT)

Table 1-6: Management Port/Maintenance Port Status

Table 1-7: Status Display LED

(6) Fault (7) ID
LED LED
Orange Blue
Not lit -
Not lit -
(F) SAS 4-Port controller
Status
The LED is lit when it is connected.
The LED flashes when data is transferred.
When operating at 100 Mbps: The LED lits in
green.
When operating at 1 Gbps: The LED lits in
orange.
(8) BBU
LED
Orange Status
- Running successfully.
-
Shutting down or backing up data in the memory.
49
Chapter 1 Overview