Errors In Hot Spare Binding; Errors In Logical Disk Binding - NEC Storage M100 Series User Manual

User Guide

10.3.4 Errors in Hot Spare Binding

Problem
Hot spare binding failed.

10.3.5 Errors in Logical Disk Binding

Problem
Logical disk binding failed.
Release 6.0
Cause and Solution
It is conceivable that a disk array problem or communication
error between the disk array and the client has occurred.
Check if the disk array or any client has a problem.
Fix the problem and then click physical disk on the main
screen to see the list of physical disks.
If the physical disk on which hot spare binding has been
performed is categorized as "not set", try hot spare binding
again. If the physical disk on which hot spare binding has
been performed is categorized as Hot Spare, binding hot
spare is successfully completed. You do not need to
perform hot spare binding again.
Cause and Solution
It is conceivable that a disk array problem or communication
error between the disk array and the client has occurred.
Check if the disk array or the client has a problem.
Fix the problem and then select Logical Disk on the tree of
the main screen to check the list of logical disks. If all the
logical disks specified in logical disk binding are bound, the
logical disk binding has been completed successfully. You
do not need to perform the logical disk binding again. If any
logical disk specified in the logical disk binding is not bound,
perform the logical disk binding again.
284
Chapter 10 Troubleshooting