Figure 7-5: Setting Disk Array Subsystem Name - NEC Storage M100 Series User Manual

User Guide
7.3.1.4 Set Disk Array Subsystem Name
You can change the disk array name.
Parameter
Product ID
Serial Number
Disk Array Subsystem Name
New Disk Array Subsystem
Name
Perform the following steps to change a disk array name:
Release 6.0

Figure 7-5: Setting Disk Array Subsystem Name

Description
Displays the product ID of the disk array.
Displays the serial number of the disk array.
Displays a name to identify the disk array subsystem.
By default, displays the current disk array subsystem name.
To change this name, enter a new disk array subsystem name.
214
Chapter 7 Initializing a Disk Array (SAS)