NEC Storage M100 Series User Manual page 156

User Guide
Parameter
Advanced
Logical disks to be bound
Perform the following steps for binding a logical disk.
1. The settings of the logical disk to be bound are listed. Confirm the settings.
2. To perform advanced settings, click Advanced.
3. After confirming the settings, click Set to display the following confirmation message.
4. Click Yes to perform the logical-disk binding.
Release 6.0
Description
Click Advanced to modify the default settings displayed
under Logical disk advanced settings.
Displays the details of the logical disks to be bound.
156
Chapter 5 Initializing a Disk Array (FC)