Table 1-8: Host Port Status - NEC Storage M100 Series User Manual

User Guide
(5) Ready
LED
Green
Lit
Lit
Lit
Flashing
fast
Lit 1
second
Not lit 1
second
Lit 1
second
Not lit 1
second
-
-
-
Host port
(9) Link LED (L) (green)
(10) Active LED (A) (green)
Link/Active flashing together
Release 6.0
Table 1-7: Status Display LED
(6) Fault (7) ID
LED LED
Orange Blue
Not lit
-
-
Lit 1
second
Not lit 1
second
Lit -
Lit -
Lit -
Flashing -
fast
- Lit
- -
- -
(8) BBU
LED
Orange Status
- Starting up or rebooting.
- Waiting for the disk enclosure behind the given
enclosure to be powered on.
- Failure has occurred.
-
Failure has occurred (log collectable).
-
Retrying as disk enclosure shortage has been
detected.
Disk Port blocked.
- Updating firmware online.
- The device is selected.
Lit Detected BBU failure.
Flashing Warning for the end of the BBU life cycle

Table 1-8: Host Port Status

Status
Lit = linkup
Not lit = link down
Lit or flashing = I/O access
Flashing in a cycle of 2 seconds = Off line
Flashing in a cycle of 1 second = Powering off
Other than above = Invalid port settings
50
Chapter 1 Overview