Document Organization; Table 3: Document Organization - NEC Storage M100 Series User Manual

User Guide
Term
Dummy carrier
Host bus adapter (HBA)
Network Interface Card (NIC)
Controller (CONT)
Power Supply (PS)
FC cable
FC switch
Physical Disk (PD)

Document Organization

Table 3 shows the documentation organization.
Chapter/ Appendix
Chapter 1: "Overview"
Chapter 2: "Workflow -
Installation to Operation"
Chapter 3: "Installing the Disk
Array System"
Chapter 4: "NEC Storage
Manager"
Chapter 5: "Initializing a Disk
Array (FC)"
Chapter 6: "Initializing a Disk
Array (iSCSI)"
Chapter 8: "Installing Optional
Parts"
Chapter 9: "Changes to the
Configuration"
Chapter 10: "Troubleshooting"
Appendix A: "Specifications"
Appendix B: "How to
Set/Check Application Server
(Windows) (FC/SAS)"
Release 6.0
Table 2: Terms Used (Contd.)
Description
Refers to a dedicated dummy carrier, which is used when a disk
drive is not installed.
Refers to a Fibre Channel (FC) controller.
Refers to an interface control device connected to a client's LAN
port or an application server's Ethernet port.
Refers to a controller in a DAC.
Refers to a power supply unit.
Refers to a Fibre Channel cable.
Refers to a Fibre Channel switch.
Refers to a physical disk.

Table 3: Document Organization

Description
This chapter describes features, components, and the basic
operation of this disk array system.
This chapter explains the flow from the installation to operation of
this disk array system.
This chapter explains how to install and connect this disk array
system.
This chapter explains NEC Storage Manager used for managing
this disk array system.
This chapter explains the initialization of this disk array system in
an FC environment.
This chapter explains the initialization of this disk array system in
an iSCSI environment.
This chapter describes the preparation and installation of the
optional parts of a disk array unit.
This chapter explains how to modify the configuration and the
settings of this disk array system.
This chapter describes possible problems and how to solve
them.
This appendix provides the specifications of the disk array.
This appendix provides the steps you should follow while setting
or checking an application server in the Windows environment,
when this disk array is configured for the FC connection.
16
About This Document