Authentication Levels And Default Password - Unify Wireless Service Gateway WSG Administrator Documentation

Figure 5: The Advanced Configuration Page

Authentication Levels and Default Password

The product has five different authentication levels:
• User rights are required for the administration of the phonebook. Default user name and
password are "user" and "password".
• Administrator rights are required for the setup, the configuration and administration, simple
troubleshooting and changing passwords (except for the sysadmin password). Default user
name and password are "admin" and "changeme".
• System Administrator rights is used for advanced troubleshooting. It gives access to all ad-
ministration pages and the permission to change all passwords. Default user name and pass-
word are "sysadmin" and "setmeup".
• Auditor rights gives basically the same access as Administrator rights, but without permission
to alter values. There is no access to the setup wizard or the Device Manager. Default user
name and password is "auditor" and "readonly".
• Different levels of password policy can be set in, see
Functionality matrix
The following matrix shows which functionality that can be used by the different authentication
levels.
Phonebook administration
NetPage login
View configuration settings
A31003-M2000-M105-01-76A9, 29/06/2020
Wireless Service Gateway WSG, Administrator Documentation
Authentication Levels and Default Password
Set Password Policy
anonymous user admin
No Yes Yes
No No Yes
General
on page 14.
sysadmin auditor
Yes No
Yes Yes
13