Adjusting Various Settings; How To Confirm Current Settings; Memory Switches - Epson TM-U330 Technical Reference Manual

Hide thumbs Also See for TM-U330:

Table of Contents

3.4 Adjusting Various Settings

This printer is able to be adjusted for the items below:

❏ Memory switch (serial communication conditions, roll paper width, cover open status handling, etc...)

❏ Roll paper width (76mm / 69.5mm / 59.5mm)

❏ Position of roll paper near end detector (factory option)

The current settings can be confirmed by a self test. (See "Self Test" (page 3-23).)

You can use a self-test to confirm the current settings. See "Self Test" on page 3-23.

This printer has "Memory switch" set which is software switches. The memory switch set consists of the

following:

❏ Msw1, Msw2, Msw5, Msw8

❏ Customize value

❏ Serial communication condition

❏ USB communication condition

Note:

Settings of the memory switch are stored in the NV memory; therefore, even if the printer is turned off, the settings

are maintained. Excessive use of this function may destroy the NV memory. As a guideline, do not use this

function more than 10 times a day.

When you use OPOS or APD, generally you don't need to adjust memory switch because OPOS or APD are able to

set these items automatically.

The memory switch can also be set by using the TM-U330 Utility.

Adjusting the spacer & memory switch

TM-U330 Technical Reference Guide

Setup 3-14

Table of Contents