Positioning The Image; Positioning The Image - Digital Projection HIGHlite Laser II 3D Series User Manual

Digital Projection HIGHlite Laser II 3D Series

Positioning The Image

The normal position for the projector is at the centre of the screen. However, you can set the projector above or below the centre, or to one side,
and adjust the image using the Lens shift feature (known as rising and falling front) to maintain a geometrically correct image.
Reference Guide

POSITIONING THE IMAGE

Shifting the lens up (rising front)
Centered lens
Shifting the lens down (falling front)
Notes
For more information on shifting
Lens control
the lens, see in the
Operating Guide.
Whenever possible, position the
projector so that the lens is centered
for the highest quality image.
Rev B December 2016
page 95