Digital Projection Ltd. Titan Laser WUXGA
Positioning the image
The normal position for the projector is at the centre of the
screen. However, you can set the projector above or below
the centre, or to one side, and adjust the image using the
Lens shift feature (known as rising and falling front) to
maintain a geometrically correct image.
Rev B September 2019
page 116
Positioning the image
Shifting the lens up (rising front)
Centred Lens
Shifting the lens down (falling front)
Notes
See Lens control on
page 50 for more
information on shifting the
lens.
Whenever possible,
position the projector so
that the lens is centered
for the highest quality
image
Reference Guide