Positioning The Image - Digital Projection Titan Pro Series 3 Installation And Quick Start Manual

Digital Projection
Titan Pro Series 3

Positioning The Image

The normal position for the projector is at the centre of the screen. However, you can set the projector above or below the centre, or to one side,
and adjust the image using the Lens shift feature (known as rising and falling front) to maintain a geometrically correct image.
Rev A November 2012
POSITIONING THE IMAGE
Shifting the lens up (rising front)
Centered lens
Shifting the lens down (falling front)
Reference Guide
Notes
For more information on shifting
the lens, see Lens Menu in the
Operating Guide.
Whenever possible, position the
projector so that the lens is centered
for the highest quality image.
Ref 38