Positioning The Image - Digital Projection E-Vision Laser 13000 WU Series Installation & Quick Start Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series

Positioning the image

The normal position for the projector is at the centre of the
screen. However, you can set the projector above or below the
centre, or to one side, and adjust the image using the Lens
shift feature (known as rising and falling front) to maintain a
geometrically correct image.
Rev A June 2019
page 102
Positioning the image
Shifting the lens up (rising front)
Centred Lens
Shifting the lens down (falling front)
Notes
See Lens control on
page 42 for more
information on shifting the
lens.
Whenever possible,
position the projector so
that the lens is centered
for the highest quality
image
Reference Guide