Bus Configuration - SoundCraft Vi5000 User Manual

®
Vi5000/7000 User Manual

7.2: BUS CONFIGURATION

OUTPUTS > BUS CONFIGURATION
To configure the console busses and map the bus masters to the console input channel strips, you simply press the
[ALL BUSS] button in the Input Fader Pages controls or assign a bank of eight bus masters to input bay 3 (right hand
bay) by touching the relevant metering group in the Master Bay touch screen. You then patch physical outputs and
name the busses by touching the Panning/Insert processing block in the touch screen area and pressing the {BUS
OUT} and {OUT LABEL} buttons in the VST area.
You can name the output busses and assign the physical output by touching the final PAN/INSERT/DELAY processing
block and pressing the {BUS OUT} and {OUT LABEL} buttons in the VST area.
7.2: BUS CONFIGURATION