SoundCraft Vi5000 User Manual page 100

®
Vi5000/7000 User Manual 10.2: MONITORING SETUP
MONITORING > SETUP
Input Solo Select
Route the Input Solo Signal to the Monitor A, B, and headphone outputs.
The Input Solo signal is defined in the SOLO section of the monitor setup screen. Each of the monitoring outputs
has its own individual IN SOLO assignment.
Output Solo Select
Route the Output Solo Signal to the Monitor A, B, and Headphone outputs.
The Output Solo signal is defined in the SOLO section of the monitor setup screen. Each of the monitoring out-
puts has its own individual OUT SOLO assignment.
Talkback Return Select
Route the Talkback Return Signal to the Monitor A, B, and Headphone outputs.
Each of the monitoring outputs has its own individual Talkback Return assignment.
Routing talkback return to the monitor or phones outputs allows a continuous feed of a return TB signal to be
heard, regardless of solo or other souce activation, and therefore can be used as a 'shout' feed without needing to
use an input channel.
Monitor Follow A
Force the Monitor B and/or Headphone source assignments to be the same as the MONITOR A
assignment.
Monitor output format
Selects one of the stereo format options to be the listening format for the Monitor A, B, and Head-
phone outputs.
LR - left source to left monitor out and right source to right monitor out • RL - left source to right monitor out,
right source to left monitor out • LL - left source to left and right monitor outputs • RR - right source to left and
right monitor outs • Mono - left and right source is summed and fed to left and right monitor. The Centre signal is
not affected. Each of the monitoring outputs has its own individual FORMAT selection.
Monitoring delay - Fine
Fine Control of the monitoring delay time at 0.02ms per step.
10.2: MONITORING SETUP