Talkback Assign - SoundCraft Vi5000 User Manual

®
Vi5000/7000 User Manual 7.3.1: MASTER VISTONICS
OUTPUTS > MASTERS > VISTONICS
Masters Bank Pages
Switch between banks of bus masters in the Master Bay Vistonics VST area.
Page A assigns bus masters 1-16 to the 16 Vistonics encoders, Page B assigns bus masters 17-32 to these controls.
Bus Level
Control the level of the bus output.
May duplicate a fader-controlled bus master, if the ALL BUSSES fader page is active on the input bays, or one of
the output fader pages A-D is active on the master bay.
Bus Solo
Solo this bus output.
See the Solo system chapter for more information.
Bus ON
Mute or Unmute this Bus.

Talkback Assign

Assign this bus to the Talkback system.
When TB ASSN is enabled on this bus, pressing the INT button in the Talkback/Osc section of the control surface
will route talkback to this bus. See the Talkback and Oscillator chapter for more information.
7.3.1: MASTER VISTONICS