SoundCraft Vi5000 User Manual page 129

®
Vi5000/7000 User Manual 14.3.2: SNAPSHOT / CUE NAME
CUES > SNAPSHOT / CUE NAME
Scroll The Cue List
Scroll through the cue list using the encoder.
Usually faster than the Up and Down buttons.
XFade On
Activate snapshot-to-snapshot cross fading function.
Crossfade Time Setting
Adjust duration for snapshot crossfades.
Most variable parameters are included in the crossfade. The exceptions are: EQ and Hi/Lo Cut frequencies, and all
Lexicon FX parameters. The Crossfade time is global for all parameters and all channels and busses.
Switches
Set the point in crossfade where switched parameters are switched.
In snapshot crossfades, variable parameters are incremented or decremented over the specified time, between
values. Switched parameters are all switched at the same time, at the point during the crossfade specified by the
Switches parameter: beginning, middle, or end.
14.3.2: SNAPSHOT / CUE NAME