SoundCraft Vi5000 User Manual page 82

®
Vi5000/7000 User Manual 7.3.3: MASTER PROCESSING
OUTPUTS > MASTERS > PROCESS
Bus Channel Strip EQ
Adjust the parametric EQ for this Master.
The output bus parametric EQ is the same is used for the input channel EQ. Please see the input channel refer-
ence for more detail.
Bus Channel Strip GEQ
Maps the BSS Graphic equaliser for this block to the console faders.
See the BSS Graphics Equaliser reference later in this chapter for more Detail.
Bus Channel Strip Dynamics
The controls are identical to those of the input channels, except there are no De-Esser modes
available for output busses and no Gate or DeEsser modes available if the console is running at
96kHz sample rate.
Bus Channel Strip Insert, Delay
The controls for the insert section are similar to those of the input channels.
Patch and name the buss, as well as control panning insert configuration, delay, and more. Extra functions unique
to the insert section of the output channels are Low Cut Filter, Phase, and Delay. However, these are the same as
those in the Input section of the input channels except that there is up to 1000ms of delay available on busses..
7.3.3: MASTER BUS PROCESSING