SoundCraft Vi5000 User Manual page 14

®
Vi5000/7000 User Manual
HARDWARE > LOCAL RACK > FANS/FILTERS
The Local Rack and Stagebox have integral fan units which are essential for reliable operation.
The fan status is monitored from the console GUI and this will provide warning if there is a problem with any of the fan
motors.
The fan units have a manual fan speed adjustment facility which allows the fan speed to be reduced in environments
where acoustic noise is an issue. Please note that reducing the speed from the factory-set value is ONLY allowable
when the console is operated in an air-conditioned environment where the ambient temperature is guaranteed to be
maintained at 20degC maximum.
To gain access to the adjustment trimmer, remove the small 2-part plastic blanking plug located to the left of the fan
filter grille. Insert a small screwdriver into the hole to adjust: turn anticlockwise to reduce the speed.
Contact Soundcraft for advice before changing fan speed if unsure.
Ensure fan units on Local Rack and Stagebox are connected and operational.
CLEAN FILTERS REGULARLY!
4.2.1: FANS / FILTERS
4.2.1: LOCAL RACK FANS/FILTERS