SoundCraft Vi5000 User Manual page 63

®
Vi5000/7000 User Manual
INPUT CHANNEL > OUTPUT BLOCK: PAN, INSERT, DIR OUT, DELAY
This page contains the output functions of the input channel including the panning, the routing to the mix masters, and
the insert point and the direct out parameters. The Pan can work in LR or in LCR mode. In LCR mode an additional
width function is available.
Panning
Adjusts panning to the Master L, R, and C busses, depending on pan mode chosen.
If the channel is paired, the balance can be adjusted. If the Pan {MODE} is set to LCR, an additional WIDTH field
becomes available.
Panning On
Activate or deactivate the panning controls.
If PAN is set to OFF, then the level to all master busses is the same as if pan controls are 'middled'. That is -3dB
for mono channel panning and 0dB for paired channel balance. If PAN is set to ON then the level to the master
busses varies between 0dB and -infinity. For balance that becomes +3dB to -infinity.
6.5.5: OUTPUT
6.5.5: OUTPUT