Talkback Setup; Talkback Return Setup; Talkback Source - SoundCraft Vi5000 User Manual

®
Vi5000/7000 User Manual
OSCILLATOR / TALKBACK > TALKBACK SETUP
Talkback is a communications path between the console operators and the artists, crew, and other personnel.
There is a direct-plug mic input (XLR) on the console surface with the TALKBACK/OSC group of controls. This and
other talkback routing and configuration options are detailed below.

Talkback Source

Select the Talkback source / input.
If (NONE) is selected the console's TB mic (front and rear panel) XLR is automatically selected. The button opens
up an assignment selection page in the master touch screen area where you can select any available microphone
input.
Talkback External Output
Assign the Talkback output directly to individual physical console outputs.
Opens an output assignment page with all available physical outputs. The talkback mic signal will be routed to the
selected connector when the [EXT] button is pressed on the front panel.
Talkback Preset Assignment
Assign a selection of output busses to the selected Talkback preset
There are 3 Talkback Presets that can be set up. Pressing the [PRESET 1], [PRESET 2] or [PRESET 3] front panel
buttons routes the Talkback mic signal to the assigned busses.

15.3: TALKBACK SETUP

15.3: TALKBACK SETUP