SoundCraft Vi5000 User Manual page 18

®
Vi5000/7000 User Manual 4.2.4: LOCAL RACK CONNECTIONS
HARDWARE > LOCAL RACK > CONNECTIONS
The SCore Rack Frame cards should be connected correctly before operating the system, using the supplied cables.
1) Connect the DSP cards 1 and 2 (left-most DSP cards in frame) to the HD cards as shown.
2) Connect the Primary Bridge Card output, the MIC Card D-Sub connector, and the BLU Link Card input and output
to the corresponding connections on the rear of the Active Breakout Unit (BLU Link in > out; Blu Link out > in).
3) Connect the required Stagebox MADI outputs to the rear of the Stagebox Breakout panel, then connect the
Stagebox Breakout Panel connections to the Stageboxes.
4) Connect the TB LINK, CONTROL DATA, and PHONES L & R outputs from the front panel of the Active Breakout
Unit to the corresponding connections on the Control Surface.
4.2.4: LOCAL RACK CONNECTIONS