Metering - SoundCraft Vi5000 User Manual

®

12.0: METERING

Vi5000/7000 User Manual 12.0: METERING
CONSOLE METERING
Level metering in the console goes from +18dB to -36 dB. 0dB on the meters represents 4dBu at the analogue output.
Gain reduction is displayed in the Range 0 - 20dB. The console uses full floating-point calculations in its DSP, which
means that the audio signal inside the mixer cannot be overloaded. If the signal level is too high at the master output
meters, it is necessary only to pull down the master fader level until the correct level is obtained.
There are meters on every channel and bus master, plus metering for every console path in the default Master Bay
touchscreen areas.
The touchscreen meters can be touched to assign the third (right-hand-end) input bay mapping.
12.0: METERING