SoundCraft Vi5000 User Manual page 47

®
Vi5000/7000 User Manual 6.4: VST CONTROL
INPUT CHANNEL > VISTONICS / VST CONTROL
FLW: Encoders Follow Masters
Activate the FOLLOW SOLO function for the respective VST encoder rows.
Pressing a bus master [SOLO/SEL] button will automatically assign the soloed bus master to this row, overriding
the default or the [USER] layer. Note that only one [FLW] can be active at a time.
VST Mode: USER
Assign the two VST Encoder rows as user-definable output controls.
The default assignments are Aux 3 and Aux 4. Use the VST User Mode [SETUP] button to define alternative allo-
cations.
SETUP
Define a VST Encoder mode.
To define the VST Encoder mode, press [SETUP]. You can now use the VST encoders to choose any AUX or GRP
control. Press the VST Encoder button (SET) to allocate the chosen control. Press [SETUP] again to exit Setup
mode.
6.4: VST CONTROL