SoundCraft Vi5000 User Manual page 57

®
Vi5000/7000 User Manual
INPUT CHANNEL > TOUCHSCREEN > DYNAMICS BLOCK
Gate Hi Cut Filter
Adjust the cut-off frequency of the gate sidechain hi-cut filter.
Together with the gate lo-cut filter, this creates a band-pass filter for side chain control of the gate.
External Key Assign
Activate the External Key Assign screen in the main Vistonics touch screen panel.
All external I/O options for the external key become available for selection.
DE-ESS Function
The de-esser is a dynamically controlled filter normally used to reduce the sibilance ('sss' components) in
a singer's voice. If the de-esser is active, the signal level will be reduced only in the band set by the filters,
when the signal in this band exceeds the required threshold.
De-Esser Sensitivity
Adjust the sensitivity of the De-esser process.
The de-esser can be used instead of the Gate, but not at the same time. The Gate-DeEss control is used to select
which type of processing is required.
De-Esser In
Activates the De-esser process
De-Esser Range
Adjusts the De-esser attenuation.
The maximum amount by which the signal in the 'Ess' band is attenuated when the DeEsser is activated.
6.5.3: DYNAMICS
6.5.3: DYNAMICS