Update Snapshot - SoundCraft Vi5000 User Manual

®
Vi5000/7000 User Manual 14.2: CUELIST CONTROL
SNAPSHOTS, CUELISTS, FILTERS > CUELIST

Update Snapshot

Update the snapshot in the currently selected cue to current console settings.
Show Timecode
Show the recall timecode for all cues in the cue number column of the cue list.
Renumber Cuelist
Renumber all cues in the cue list as consecutive integers.
Cue names, which may incorporate the original cue numbering, remain unchanged.
Scroll The Cue List
Scroll through the cue list using the encoder.
Usually faster than the Up and Down buttons.
Apply Changes To Scoped Parameters In Selected Cues
Mode used to apply new settings to multiple cues.
Select {START} to enter this mode. You can then use the scope settings to filter process and channel selections,
and use the cue list's cue-selection functions to choose which cues will be affected. Only 'scoped' selections will
be applied to selected cues when you click the (APPLY} button. You can click the {CANCEL} button at any time to
leave this mode.
14.2: CUELIST CONTROL