®
Vi5000/7000 User Manual
CONSOLE METERING > INPUT METERING
Each input channel has an input meter and every input meter has two parts: A 20-segment level meter (top), and a
9-segment Gain Reduction Meter (GRM).
Both the measured point in the channel signal flow and the metering peak hold time can be selected in the main set-
tings screen (via the [MENU] button), in the (Settings) tab.
Input Level Meter
Shows the input level at the selected point in the input channel signal path.
The overload (OVL) LED indicates an overloaded analogue input (mic preamp clipping).
Input Gain Reduction Meter
Shows the overall gain reduction of the limiter and compressor stages, if they are engaged.
12.0: METERING
12.1: INPUT METERING
12.1: INPUT METERING