SoundCraft Vi5000 User Manual page 50

®
Vi5000/7000 User Manual 6.5.1: INPUT BLOCK
INPUT CHANNEL > TOUCHSCREEN > INPUT BLOCK
LO CUT Cut-Off Frequency
Adjusts the LO CUT cut-off frequency
This is part of the digital (post AD) LO CUT / HIGH CUT section and affects all inputs. The affected frequency
range is shown graphically in the EQ section of the touch screen.
LO CUT IN
Switch the digital LO CUT filter in and out
When the digital LO CUT filter is switched in, the LO CUT indicator above the response graph in the EQ touch
section is highlighted in blue.
HI CUT Cut-Off Frequency
Adjusts the HI CUT filter cut-off frequency.
This is part of the digital (post AD) LO CUT / HIGH CUT section and affects all inputs. The affected frequency
range is shown graphically in the EQ section of the touch screen.
HI CUT IN/OUT
Switch the digital HI CUT filter in and out
When the digital HI CUT filter is switched in, the HI CUT indicator above the response graph in the EQ section of
the touch screen is highlighted in blue.
Channel Pairing Selection
Activate channel pairing selection on touch screen.
The touch screen will show pairing candidate options for the channel - these will be consecutive channel num-
bers (horizontal neighbours) and the corresponding channels on higher and lower layers (vertical neighbours).
All channel parameters will be copied to the selected pairing candidate and the pairing FORMAT field will be
displayed.
Pairing Format Selection
Adjusts stereo format of paired channels.
The choices are LR, RL, LL, RR, MONO. If the channel is not paired, the FORMAT field will not be displayed.
6.5.1: INPUT BLOCK