SoundCraft Vi5000 User Manual page 209

Device View
The Device View allows viewing and editing of a
selected Dante device.
Receive – This tab presents information about all
channels being received, and channels available
to the current device. The tab is arranged into
two areas:
Receive Channels: Lists the Rx channels in the left
pane of the window. It shows whether or not they are
connected and, if connected, the channel they are
connected to and the status of that connection.
Available Channels: On the right pane of the window, lists the Tx channels from other devices that
are available for subscription by the current device. You may drag and drop Available Channels to
Receive Channels.
Transmit: This tab is used to view and edit the
transmit configuration of a device.
Transmit Channels: The area on the left pane of the
tab shows the Tx channels for the device, and any
user‐defined channel label. It allows the user to
create labels for transmit channels. Input to the
table is filtered to prevent illegal characters from
being used in channel labels. To change a Tx
channel label double click on the label and type in a
new one. Tx channel labels must be unique on a
single device.
Vi Dante Card User & Setup Guide V1.1