SoundCraft Vi5000 User Manual page 127

®
Vi5000/7000 User Manual 14.3.1 CUE NUMBER/TIMECODE
CUES > NUMBER & TIMECODE
Enable Cue
Enable or disable this cue.
Disabled Cues will be 'jumped over' if recalling successive Cues using the [NEXT] button. Enabled cues are shown
in white in the cue list. Disabled cues are shown 'greyed out'.
Go To Cue Number Select
Set a following cue number - to be recalled a set amount of time after this cue has been recalled.
Can be very useful for firing a number of events from one cue activation. When combined with the Crossfade
function, it's possible to create pseudo-dynamic Cues.
'Go To Cue' On
Activate the GO TO CUE functionality for this cue.
'Go To Cue' Time
The amount of time that will elapse before the 'GO TO CUE' cue is recalled.
Times ranging from 0 to 30 seconds can be set, in 0.5s steps. Using a time of 0s results in the chained Cues being
recalled almost at the same time. This can be useful in conjunction with the Scope system to combine several Cue
recalls each affecting different aspects of the console, into one recallable event.
14.3.1 CUE NUMBER & TIMECODE