SoundCraft Vi5000 User Manual page 222

ViSi Remote
REMOTE CONTROL iPAD APP FOR SOUNDCRAFT DIGITAL MIXING CONSOLES
The Soundcraft ViSi Remote is an iPad app which provides
wireless control of Soundcraft Si Expression, Si Compact,
Si Performer and Vi Series consoles. ViSi Remote allows you
to mix and contour your sound from anywhere in a venue
without being constrained by cables.
Systems can be configured to run in several ways.
1. A single iPad can control one console's levels and
graphic EQ.
2. Multiple iPads can control a single console's settings.
This means that artists can each control their own
monitor mix directly from their performance position
on stage.
3. A single iPad could control a number of consoles in a
network, which may include any of the consoles noted
in the above range, so Si and Vi consoles may be mixed on a network.
4. The ViSi app may be used as an offline familiarisation tool.
Simply connect a Wireless Router* to the HiQnet port on the console and mix remotely within minutes.
•
Optimise the front of house mix from anywhere in the room.
•
Adjust monitor levels while standing next to the artist.
•
Control input, aux and output levels and graphic EQ settings.
•
Use in standalone mode for familiarisation with app functions.
•
Control a network of consoles from one iPad app (e.g. FOH and Monitor):
Vi1, Vi2, Vi4, Vi6 (requires console software V4.6 or above).
* Soundcraft does not guarantee operation with all wireless routers.
•
Use multiple iPads on the same console, so several artists can control their
own monitor mixes.
•
Console and audio unaffected by wireless dropouts or interference.
•
Auto discovery of consoles on network — no manual address entry needed.
•
Connects to consoles via Harman's HiQnet ® network.