SoundCraft Vi5000 User Manual page 201

®
Vi5000/7000 User Manual 18.2.1: STATUS - TOUCH SCREEN
VM² STATUS > TOUCH SCREEN INPUT BLOCK
RF Strength
Show the RF (Radio Frequency) status of the connected wireless microphone.
A red or green 'RF' icon is displayed to indicate the health of RF level. A green RF indicator is displayed when the
signal strength at the receiver is strong enough to enable audio transmission. A red RF indicator is displayed when
the signal strength is too low for audio transmission or if the transmitter if switched off. The actual value in dB of
the RF signal strength is displayed in the VST section when the input block is selected.
Battery Level
Seven-segment transmitter battery level indication.
Red segments 0-1 indicate one hour or less remaining. The Amber segment (segment 2) indicates 25 percent
of battery life remaining. The Green segments (segments 3-7) indicate 35-100 percent of battery life remaining.
The number of hours remaining in the transmitter battery is displayed in the VTS section when the input block is
selected and varies with the type of battery used.
Network Error
Indicates a Network error (Grey Gain, Battery, and RF icons).
The system is able to differentiate between a network error/disconnection and out of range RF or a switched-off
transmitter. In the case of a network error, the AKG or Shure elements only within the input strip overview on all
channels will change to a greyed-out condition.
18.2.1: VM ² TOUCH SCREEN STATUS - INPUT