SoundCraft Vi5000 User Manual page 72

®
Vi5000/7000 User Manual 7.1: LCR MASTERS
OUTPUTS > LCR MIX MASTER BUSSES
Access L/C/R GEQ
Maps the BSS Graphic equaliser for this block to the console faders.
See the BSS Graphics Equaliser reference later in this chapter for more Detail.
L/C/R Dynamics
Access the L/C/R bus dynamics.
The controls are identical to those of the input channels, except there are no Gate or De-Esser modes available for
Master LRC busses.
L/C/R BSS DEQ
Access the BSS DPR901ii Dynamic EQ, if assigned.
The EQ controls will appear in the VST section of the Master Bay touch screen. You can assign any of the available
BSS 901 processors to an LCR Master insert point via the output block. See section 6.6 for more detail.
L/C/R Insert/Delay etc (Output Block)
The controls for the Insert/Delay section are similar to those of the input channels.
Extra functions unique to the insert section of the output channels are Low Cut Filter, Phase, and Delay. However,
these are the same as those in the Input section of the input channels.
7.1 LCR MASTERS