SoundCraft Vi5000 User Manual page 150

®
Vi5000/7000 User Manual 16.2: SHOW MENU
MENU > SHOWS
Shows are the main vehicle for storing console control settings, cue lists and snapshots, and audio set-up.
Loading Shows, copying Shows to and from USB data storage devices, and creating new Shows is done from the
Show tab in the Main Menu.
The left-hand side of the page displays the shows that are present on the console's hard drive. If there are any USB
storage devices connected, these will be selectable and displayed on the right hand side of the page. Normally the
front panel USB Data Sockets will be used (USB1 and 2), but it is possible to connect USB data storage devices to
the rear panel USB sockets (USB3 and USB4), and select the required device with the (USB1), (USB2), (USB3), and
(USB4) buttons. The up and down-arrows on both Show file lists are used to scroll though the available Show titles.
The user can select a default show or another existing show and use the (SAVE) and (SAVE AS) keys as required.
IMPORTANT: If you want to base your Show on one of the defaults, you MUST save it as a new show before you start
working, otherwise you will not be able to store Snapshots. This is because of the write-protection assigned to the
default Shows.
16.2: SHOW MENU