Pc Programming; Installing And Starting The Maintenance Console - Panasonic KX-TDA50 Programming Manual

1.2 PC Programming

1.2 PC Programming
1.2.1

Installing and Starting the Maintenance Console

System programming, diagnosis and administration can be performed with a PC using the
Maintenance Console (KX-TDA50: KX-TDA50 Maintenance Console; KX-TDA100/KX-TDA200: KX-
TDA Maintenance Console; KX-TDA600: KX-TDA600 Maintenance Console).
This section briefly describes how to install and start the Maintenance Console when the PC and the
PBX are connected by USB cable. The screenshots shown in the installation procedure are based on
the KX-TDA50 Maintenance Console.
System Requirements
Required Operating System
• Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP
Minimum Hardware Requirements
• CPU: 300 MHz Intel Celeron microprocessor
• HDD: 100 MB of available hard disk space
• RAM: 128 MB of available RAM
12 PC Programming Manual
® ®
® ®