Panasonic KX-TDA50 Programming Manual page 159

Value Range
Port number
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Port Type
Selects the port type.
Notes
• Each ISDN connection in a QSIG network must have a master port on one PBX and a slave
port on another PBX.
• ISDN extensions can belong to an incoming call distribution group or idle extension hunting
group. In this case, an MSN can be assigned.
Default
CO
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
• Click the desired cell in the column.
• Select the desired cell in the column, and then click Command.
2.7 [1] Configuration
PC Programming Manual 159