Panasonic KX-TDA50 Programming Manual page 146

2.7 [1] Configuration
Feature Manual References
1.3.13 CLIP (Calling Line Identification Presentation)
Ring Back Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
ISDN In/Out Call Type
Selects the method used to send dialed digits to the network.
Default
CO port: En-bloc
QSIG (slave/master) port: Overlap
Value Range
En-bloc: The PBX sends all of the dialed digits at once after the extension user completes dialing.
The PBX recognizes the end of dialing when (1) # is dialed, if programmed, (2) a preprogrammed
telephone number is dialed, or (3) the inter-digit timer expires.
Overlap: The PBX sends dialed digits one at a time.
Maintenance Console Location
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension Inter-digit
2.8.17 [2-9] System Options—Option 2—End of Dial Plan—[#] as End of Dial for en Bloc mode (KX-
TDA100/KX-TDA200/KX-TDA600 only)
2.12.7 [6-7] Dialing Plan
Feature Manual References
1.9.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
146 PC Programming Manual