Panasonic KX-TDA50 Programming Manual page 707

• 2.16.6 [10-4] Miscellaneous—Intercept—Routing to Operator - No Destination (Destination
is not programmed)
Feature Manual Reference
1.9.12 Intercept Routing—No Destination
Intercom Call
• 2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Alternate Calling - Ring / Voice
• 2.10.1 [4-1-1] Wired Extension—Extension Settings
– Main—Extension Number
– Main—Extension Name
– Option 3—Intercom Call by Voice
• 2.10.10 [4-2-1] Portable Station—Extension Settings—Main
– Extension Number
– Extension Name
Feature Manual Reference
1.9.13 Intercom Call
Internal Call Block
• 2.8.13 [2-7-3] Class of Service—Internal Call Block—COS Number of the Extension Which
Receive the Call from Other Extension 1–64
• 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—COS
• 2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
• 2.10.10 [4-2-1] Portable Station—Extension Settings—Main—COS
• 2.11.1 [5-1] Doorphone—COS
• 2.11.6 [5-4] External Relay—COS Number
Feature Manual Reference
1.9.14 Internal Call Block
ISDN (Integrated Services Digital Network) Features
• 2.7.13 [1-1] Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 2.7.15 [1-1] Slot—PRI Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension Inter-digit
• 2.8.17 [2-9] System Options—Option 2—End of Dial Plan—[#] as End of Dial for en Bloc
mode (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 2.10.1 [4-1-1] Wired Extension—Extension Settings
– Main—Extension Number
– Option 7—ISDN Bearer (KX-TDA100/KX-TDA200/KX-TDA600 only)
• 2.10.10 [4-2-1] Portable Station—Extension Settings—Option 7—ISDN Bearer
• 2.12.8 [6-7] Dialing Plan—Auto Assign
Feature Manual Reference
1.9.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
IP-PT (IP Proprietary Telephone)
• 2.7.22 [1-1] Slot—IP-Extension Card Property
• 2.7.23 [1-1] Slot—IP-Extension Card Property—Common Settings
3.2 Feature Programming References
PC Programming Manual 707