2.7 [1] Configuration
Pulse Speed
Selects the speed at which pulse dials are sent to the analog CO line.
Default
Low
Value Range
Low, High
Maintenance Console Location
2.7.11 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
None
Reverse Detection (KX-TDA100/KX-TDA200/KX-TDA600 only)
Selects the type of CO line call for which the reverse signal from the telephone company is detected.
Default
Disable
Value Range
Disable: For no CO line call
Outgoing: For outgoing CO line calls only
Both Call: For both outgoing and incoming CO line calls
Maintenance Console Location
2.7.11 [1-1] Slot—LCO Port
Programming Manual References
None
Feature Manual References
None
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analog CO line.
Default
Enable
120
PC Programming Manual