Panasonic KX-TDA50 Programming Manual page 398

2.9 [3] Group
Others—FWD to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is forwarded to the
VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode. It is also
possible to send no DTMF signal to the VPS.
Default
Answer by Mailbox
Value Range
None, Answer by Mailbox, AA
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.6.6 FWD (Call Forwarding)
Others—Intercept Routing to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is intercepted to the
VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode. It is also
possible to send no DTMF signal to the VPS.
Default
None
Value Range
None, Answer by Mailbox, AA
Maintenance Console Location
2.9.18 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Manual References
1.9.11 Intercept Routing
Others—Mailbox for Extension
Specifies whether the mailboxes use the same numbers as the extensions and incoming call
distribution groups, or use different numbers as programmed for each extension or incoming call
distribution group.
398 PC Programming Manual