Panasonic KX-TDA50 Programming Manual page 38

2.3 Connect
Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate
Modem Initialize
: T, P and W can only be entered when using MPR Software File Version 3.2000 or later.
* 1
Connection Settings for LAN
Setting
IP Address
38 PC Programming Manual
Values
COMx
2400bps, 4800bps,
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Values
1-9, 0, *, #, "," [comma],
T, P, W* 1
Auto(Tone),
Auto(Pulse), Manual
–
COMx
1200bps, 2400bps,
4800bps, 9600bps,
19200bps, 38400bps
–
Values
1.0.0.0–
223.255.255.255
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Specify the speed of data transmission.
Description
Enter the telephone number to be dialed to
access the PBX.
T: Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done with
a connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port assigned
to the PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialize command, and click
Initialize to send the command to the modem.
For more details, refer to your modem's
instruction manual.
Explanation
Specify the IP address of the PBX on the LAN.
Enter the same IP address that was input in IP
Address of 2.7.28 [1-1] Slot—CTI-LINK Card
Property (KX-TDA100/KX-TDA200/KX-
TDA600 only).